The Blog Single

  • How to Remove a Tree Stump Painlessly in Edmond

    remove tree stump painlessly in EdmondGetting rid of the stump after the tree is cut in your surrounding yard is an obvious yet painful task. We should be take more care and call for professionals for tree stump removal in Edmond. There are quite a few procedures though, like digging it from the ground and then burn it. Or you can use a chemical stump remover to melt the rest part.

    So let us go through the thorough process of tree stump removal:

    • You need a shovel to dig out the stump from the ground. Try and dig until you reach the last part of the root deep in the ground. That will expose the underneath dirt with the root and the surroundings. If the root is too deep inside the earth and you are unable to dig out the whole part, then try another method.
    • If the root is wide, then try to cut it. Use a lopper or a saw to cut the root to the pieces, but be careful not to hit on a rock nearby, as that can hurt you. You also have to make sure that the root is totally exposed before trying to cut it, else your axe will get stuck in the root midway.
    • After cutting the upper portion, you can pull the inner portion of the stump by a grub hoe. Try hard and you will be able to pull off the main root, and then you can concentrate on tearing the branch roots as well from the sides.
    • When the greater part of the root has been cleared, chop up the rest part and grind it. It can be best used in compost pile.
    • Now fill the hole with debris and the sawdust that has been produced throughout the process.

    There are various other methods to get rid of tree stump removal in Edmond.  You can use a machine grinder to remove the whole stump or burnt it down. These methods need professional care so it will be better to call for tree removal companies to clear the stump by these processes.

0 comment

Leave a Reply

Your email address will not be published. Required fields are marked *